Felling trees, although not permitted legally, is done only under certain circumstances. The stumps are removed when the trees has been inflicted with diseases or when the trunks have grown very old and rotten. Trees are also cleared off for construction purposes. Removing a tree stump is a quite tedious process when done manually. The girth of the trunks is so huge that it takes a lot of time to chop it off with a spade. A stump removal chemical is employed to accentuate the process of decay, which saves time and effort. You will be explained the process of feeling tress with the chemical method in the following content.
Chemicals for Removing Tree Stump
After the trees are felled, only the remaining portion of the trunk remains. The roots of the trees continue feeding it and it remains rooted into the ground. The surface of the stumps is vulnerable to common plant diseases that cause it to rot and decay. So, these are either uprooted with the help of a grinder or they are burnt. Chemicals are used to accentuate the process of decaying the trunk. These chemicals act on the plant cells and the root system, helping in quick decay. This way, the trunk becomes soft and can be removed.
The basic component of a chemical stump remover is potassium nitrate or saltpeter. The powder is spread all over the trunk and rots it within a period of four to six weeks as it continues to absorb the potassium nitrate powder. This powder actually supports growth of fungi on the trunk that eat away the wood. Once the stump has rotten, you can either burn it or chop it. Stumping powders are also available in the market containing various composition that aid in quick decay of trunks. Professional tree choppers usually make use of a solution of sodium hydroxide or caustic soda. This chemical compound is readily available in paint and hardware shops. A solution is made by mixing caustic soda and water in the ratio 1:2. This solution is poured over the trunks in a large quantity and it gets soaked up. You have to pour it at least 3 or 4 times for rapid action. The unwanted part is then removed with a grinder. A solution of magnesium sulfate or caustic potash is also quite effective in removing tree stumps, as it kills the root quite rapidly. The same effect is produced by rock salt too.
You can check out the different types of tree trunk removers in the market. One of the best chemicals for this purpose is the Tree Stump Remover. This product can be shopped for online or can be purchased from any plant products' stores. A few holes are drilled on the stumps and the powder or the chemical solution is poured into these holes, that further spreads into the roots. Other brands for tree trunk removal are Bonide 272 Stump Remover, Bonide Stump Out, Green Light 40004 Cut Vine and Stump Killer, Green Light 40003 Stump Remover, etc. Sometimes, the powders cause emission of fumes that can lead to choking, so make sure to wear a mask before applying them.
You can apply the chemical before using a grinder on the stump or removing it manually. Apart from all these, you should know the species of the tree to which the trunk belongs. The composition of the stump removal powders vary depending upon the purpose of use. You must also read the instructions mentioned on the leaflet and follow accordingly.